GREATER POWER FOR YOUR PROTECTION SCHEME TESTING
The F6300 High-Power Current Amplifier works in combination with the F6150 Power System Simulator to bring your realistic protection scheme testing power to the next level. This combination allows you to evaluate the performance of your protection scheme for practically all power system events.
The F6300 and F6150 combination can easily test all high-burden electromechanical relays, which require high-power current sources to drive the necessary current. In combination, the F6300 and F6150 can deliver three currents up to 90 A, 3-phase continuous at 450 VA, or 180 A for 1.5 seconds at 675 VA. The F6150 provides three voltage sources and one current source of 450 VA; the F6300 provides two 450 VA current sources.
The F6300 in combination with the F6150 can perform the following applications:
• Provide a realistic test of your protection schemes by simulating a 3-phase close-in fault with high short-circuit current, up to 180 A.
• Test your high-burden protection schemes (e.g. primary and secondary schemes simultaneously) or electromechanical protection schemes.
• Perform dynamic and transient testing of 3-winding, 3-phase current differential protection schemes that require up to nine high-power current sources, up to 60 A.
Features and Benefits
• High Power. Capable of testing complete high-burden electromechanical protection schemes and panels.
• Transient Mode. Two channels up to 180 A at 675 VA simulate close-in faults on the power system.
• Flexibility. Configurable sources allow you to test high-burden protection schemes and 3-winding transformer protection systems.
• Multiple Ranges. Delivers maximum power even at low currents, for testing high-burden electromechanical schemes, such as earth/ground fault relays.
• Reliability. Rugged construction and proven state-of-the-art design provide laboratory accuracy without compromising field performance.